+39 02 4597757 info@dramsrl.com

C4 POLYMERS LTD.

Protolitte®

Protolitte® ist eine exclusive Marke von C4 Polymers Ltd.

PROTOLITTE®  ist ein neues, aufregendes Konzept, das es Rotomouldern zum ersten Mal ermöglicht, einen präzisen Rotationsguss durchzuführen. Jeder erfahrene Rotationsgießer wird Ihnen bestätigen, dass sich bei diesem Verfahren alles um die Wärmeübertragung dreht. Dies ist der erste Wärmebeschleuniger, der für Rotationsformen zur Verfügung steht. Er wirkt als Strömungsförderer und dient als Hilfsmittel zur Oberflächenverbesserung.
Wird die Wärme lokal gesteuert, können die Ergebnisse des Prozesses des Rotationsformens besser kontrolliert werden. Durch seine Doppelwirkung von Wärmebeschleunigung und Schutz der Rotationsform ist Protolitte® das perfekte Werkzeug zur Kontrolle der Wandstärke der Formteile.
Wichtig ist: Protolitte® wirkt nicht als Schmiermittel, wie es bei vielen anderen Produkten auf dem Markt der Fall ist. Protolitte® ist als Paste und als Spray erhältlich.

 

Vorteile der Protolitte® Paste:

  • Lässt sich leicht und präzise auf die gewünschten Bereiche auftragen
  • Null Verschwendung
  • Schützt gegen Agenten wie Peroxid in XLPE (Aluminiumwerkzeuge)
  • Sicher und ungefährlich in der Anwendung
  • Sicher zu lagern
  • Sicher zu transportieren
  • Größere Flächendeckung im Vergleich zu Sprays

Protolitte® Spray

Protolitte® Spray hat eine nichtflüchtige Trägerlösung, mit der die Wandstärken der Formteile kontrolliert und die Werkzeuge geschützt werden können. Er funktioniert nach dem gleichen Prinzip wie die Protolitte® Paste, mit der Spray-Version können jedoch größere Flächen abgedeckt werden. Wie jedes andere Aerosol muss es mit Vorsicht aufgetragen werden. Dank seiner Zusammensetzung auf nichtflüchtiger Basis ist es für den Anwender und die Umwelt wesentlich sicherer in der Handhabung.

  • Protolitte® steht für pinhole-freie Oberflächen, für Gewinde und in schwierigen Bereichen.

 

  • Ist sicherer in der Anwendung als andere Sprays.
  • Schützt die Werkzeuge vor Porosität.
  • Sein flüssiger und öliger Träger bleibt während der gesamten Formgebung beweglich und füllt alle engen Bereiche aus.
  • Bietet eine 30 % höhere Abdeckung als vergleichbare Produkte auf dem Markt.

 

  • Produkt mit doppelter Wirkung
  • Verbessert die Oberflächenbeschaffenheit des Formteiles
  • Lokalisierte und selektive Wandstärkenkontrolle
  • Wirkt als mildes Trennmittel
  • Hält die Werkzeuge wesentlich sauberer

 

  • Keine weißen Flecken nach dem Gießen
  • Effektivstes Produkt für XLPE
  • Die Wirkung der Hitzebeschleunigung ermöglicht das Rotationsgießen von XLPE bei niedrigeren Temperaturen und damit weniger Pockmarkierungen an den Formteilen

Informationen - Anfrage

Zustimmung

14 + 14 =

Essayez nos nouveaux produits

NOUVEAUTE: essayez les nouvelles étiquettes VOLT! >>> Duragraf

Duragraf a développé une nouvelle étiquette à appliquer dans le moule: s’appelle VOLT. Il s'agit d'une étiquette à appliquer dans le moule qui laisse moins de résidus adhésifs sur le moule et sur la pièce finie. Facile à appliquer.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF est un concentré à base d'eau qui s'applique sur le moule pour faciliter le flux des polyoléfines et du nylon dans les zones du moule rotatif difficiles à remplir lors du processus de rotation.
RotoFlow® WB SF empêche la formation de vides autour des inserts, des rayons étroits, des filetages et dans les cavités.


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash Trimmer

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Prova i nostri nuovi prodotti

NOVITÀ: prova le nuove Volt! >>> Duragraf

Duragraf ha sviluppato una nuova decal in-mould chiamata VOLT. Lascia meno residui di adesivo sullo stampo e sul pezzo finito. Facile da applicare.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF è un concentrato a base acqua che si applica sullo stampo per facilitare lo scorrimento di poliolefine e nylon nelle aree difficili da riempire nel processo rotazionale.
RotoFlow® WB SF aiuta a riempire i vuoti intorno agli inserti, raggi stretti, filettature e nelle cavità.


Sbavatori Flash-It Y, Apri stampo Flash-It O e Pulisci flange Flash-It G >>> Sbavatori