+39 02 4597757 info@dramsrl.com

Ébavureurs

Ébavureurs BB

Vous avez besoin d’un ébavureur pratique et efficace? Qui réduise la possibilité d’accidents du travail? Un outil qui n’altère pas l’esthétique de votre pièce?

Voici un produit de prévention contre les accidents du travail, très polyvalent et facile à utiliser. L’ébavureur est facile à manier, léger et il est peut probable de se blesser en l’utilisant. En effet, il ne comporte aucune lame ou bord coupant exposé (au contraire des cutters). Il est facile à affûter et offre une longue durée de vie. C’est l’outil idéal quand l’esthétique du produit est importante: il laisse de petits sillages très linéaires.

Ébavureurs Flash-It Flah

  • Élimine facilement les bavures des pièces moulées en plastique.
  • Permet plusieurs passages sur des bavures épaisses.
  • Poignée en plastique à prise sûre.
  • Lame durable en acier inoxydable.
  • Convient aussi bien aux opérateurs gauchers, qu’à ceux droitiers.
  • Lame courbe.
  • Affûtable.

Demande d'information

Accord de confidentialité

5 + 13 =

Essayez nos nouveaux produits

NOUVEAUTE: essayez les nouvelles étiquettes VOLT! >>> Duragraf

Duragraf a développé une nouvelle étiquette à appliquer dans le moule: s’appelle VOLT. Il s'agit d'une étiquette à appliquer dans le moule qui laisse moins de résidus adhésifs sur le moule et sur la pièce finie. Facile à appliquer.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF est un concentré à base d'eau qui s'applique sur le moule pour faciliter le flux des polyoléfines et du nylon dans les zones du moule rotatif difficiles à remplir lors du processus de rotation.
RotoFlow® WB SF empêche la formation de vides autour des inserts, des rayons étroits, des filetages et dans les cavités.


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash Trimmer

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Try our new products

NEW graphic: try the new VOLT! >>> Duragraf

Duragraf has developed a new in-mould graphic called VOLT. It is a mould in graphic that leaves less adhesive residue on the mould and on the finished part. Easy to apply.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF is a concentrated water-based mould coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational moulds.
RotoFlow® WB SF helps fill in voids around inserts, tight radii, threads, and deep cavities.

 


Flash-It Flash trimmers Y, Flash-It mould opener O and Flash-It flange cleaner G >>> Flash trimmers

Prova i nostri nuovi prodotti

NOVITÀ: prova le nuove Volt! >>> Duragraf

Duragraf ha sviluppato una nuova decal in-mould chiamata VOLT. Lascia meno residui di adesivo sullo stampo e sul pezzo finito. Facile da applicare.


RotoFlow® WB SF >>> Stoner

RotoFlow® WB SF è un concentrato a base acqua che si applica sullo stampo per facilitare lo scorrimento di poliolefine e nylon nelle aree difficili da riempire nel processo rotazionale.
RotoFlow® WB SF aiuta a riempire i vuoti intorno agli inserti, raggi stretti, filettature e nelle cavità.


Sbavatori Flash-It Y, Apri stampo Flash-It O e Pulisci flange Flash-It G >>> Sbavatori